Art · Surface Treatment Workshop

Surface Treatment Workshop – Weeks 18 & 19

Well I’ve managed to get myself a bit behind with the Surface Treatment Workshop,  so I’m posting 2 weeks together today and still hope to get this weeks workshop done to post later in the week!

Week 18 was about using ventilation tape. Basically it’s a thick self adhesive tin foil and it has a backing you peel off. This is probably something I would never have thought of using for art work…..

Week 18 - Ventilation Tape 3 - NB

This is ventilation tape just screwed up and the backing peeled off and stuck down. I then applied several washes of thinned acrylic paint. The paint sits very nicely in the grooves.

Week 18 - Ventilation Tape 2 - NB

Week 18 - Ventilation Tape 1 - NB

For the above I made marks in the ventilation tape, then peeled the backing off and stuck them down. I made more marks and then applied acrylic paint over the top.

Week 19 of the Surface Treatment Workshop is about embossing. I’ve used molding paste for embossing before and it worked really well, so this time I decided to try something different. I decided to use acrylic Matte Gel Medium and also Fiber Paste.

Week 19 - Embossing 1 - NB

For the above sample I started with a painted background and then applied a thin layer of Matte Gel over the top. I left it to start to dry for about an hour or so. Then I pressed a piece of patterned vintage fabric into it. I carefully peeled it off and left it to dry. The Matte Gel dried transparent so I applied some thin washes of pearl mica over the top to make the pattern stand out more.

Next is the Fiber paste sample…

Week 19 - Embossing 2 - NB

Again I started with a painted background and then applied a layer of Golden Fiber Paste. I left it to start to dry, about an hour or so. Then I pressed a piece of wallpaper onto the left side of the sample, it had a lined pattern on it. It didn’t work quite a well as I hoped but did create some extra texture. On the right hand side I pressed some rubber grip (the stuff you place under mats to stop them slipping) into the Fiber Paste, used some paper to press it into the paste and then peeled it off. This worked  a bit better, you can see the square patterns. I finished with washes of pearl mica to add some extra colour.

So it was an interesting couple of weeks in the workshop, trying different things and covering new ground (well, new ground for me!). The next surface Treatment Workshop is about using glazing mediums – looking forward to this….

 

Art · Surface Treatment Workshop

Surface Treatment Workshop – Week 13

Today sees a return to the Surface Treatment Workshop after a few weeks break for my holiday and time for me to recover from a rather unpleasant injury. Week 13 is about using pastes. I used Galeria Modelling Paste.  Here’s what I did with it…

Week 13 - Pastes - Collage 1 - NB

Pastes are very good for embedding objects into your art work. Above, after applying my paste (not too thinly) I pressed some papers, cardboard and some rusty washers into the paste. The washers were quite chunky and heavy but the paste did a great job of sticking them down. I then simply applied a thin wash of pale blue acrylic paint over the paste.

Week 13 - Pastes - Collage 2 - NB

In the above sample, after applying the paste I embedded some papers and then I used a number of different things to make marks in the paste around the paper. I used a round cardboard tube and some bubble wrap. When the paste was dry I painted over the paste with pale blue and turquoise paint and highlighted some of the marks in the paste with gel pens.

Week 13 - Pastes - Emboss 1 - NB

Pastes are very good for embossing patterns into. Above I applied my paste to some thick paper and then pressed some swirly shapes into the paste. When it had dried I painted the shapes with blue, gold and turquoise acrylic paint.

Below is another similar sample:

Week 13 - Pastes - Emboss 2 - NB

I simply applied a pale turquoise acrylic paint to this one. These shapes turned out quite well.

So then to sum up my findings for this weeks workshop I would say pastes are a very useful commodity to have among my art supplies. I don’t think I will be using huge amounts of it but it will come in handy on occasions and it is very easy to use – does what it says on the tin… ! As always, these samples will be stuck into my dedicated STW sketchbook!

Next weeks Surface Treatment Workshop is about skins – this could turn out quite interesting. Looking forward to it…