Art · Surface Treatment Workshop

Surface Treatment Workshop – Week 12

Week 12 of the Surface Treatment Workshop is all about Metal Leaf. This weeks’s major discovery for me is that I DON’T LIKE metal leaf… !! I’ve never used metal leaf before and probably never will again but it’s part of the workshop so I’ve done it and given it my best shot….

You can click the images to view them in more detail…

Week 12 - Metal Leaf - Gold Lace - NB
Gold Lace

Above is my first sample – metal leaf over some lace. This actually worked quite well. I stuck my lace to some thick paper with PVA glue, then applied more glue over the lace and applied my metal leaf over the lace. I carefully pushed the metal leaf into the lace thoroughly to make sure the pattern showed through.

For my next sample I applied glue through a home made stencil and then applied the metal leaf over the stenciled glue:

Week 12 - Metal Leaf - River of Gold - NB
Rivers of Gold

It kind of worked OK, you could see the pattern but the edges weren’t crisp – probably something to with my technique…. ! So I then collaged around the metal leaf with some of my left over art work from previous projects and blended in some oil pastels.

How both samples look in my sketchbook:

Week 11 Sketchbook - NB

Now, why didn’t I like metal leaf?? I’ll tell you:

Firstly, I discovered I had the same issues with metal leaf as I did with the aluminium foil (Week 3) – it’s difficult to apply colour to the shiny surface. Secondly it’s incredibly flimsy, delicate stuff to handle and use – it tears very easily. Thirdly,  it’s very “fly away” – when you rub your excess metal leaf off just breathing too closely makes the stuff fly every where. I’m going to be picking up metal leaf bits for weeks….

In conclusion then my final question is: why should I faff around with gold metal leaf when I can use gold acrylic paint instead? Gold acrylic paint is quicker, easier, and cheaper to use and the end result is the same….. ! Of course, this is just my personal observation and experience of metal leaf. It will not be featuring in my future art works…

Art · Surface Treatment Workshop

Surface Treatment Workshop – Week 5

Well week 5 of the Surface Treatment Workshop has finally arrived! The focus for this week is crackle paste. I used Golden Crackle Paste and I have to say it is brilliant stuff! Using crackle paste is time consuming but worth the effort and a little patience!

Week 5 - Crackle Paste - Blues & Browns - NB

I did decide to go for some blues and brown colours – couldn’t resist! The above sample is on cardboard and will go in my sketchbook. Next are some closer views of the above sample:

Week 5 - Blues & Browns - detail 1 - NB

Week 5 - Blues & Browns - detail 2 - NB

Week 5 - Blues & Browns - detail 3 - NB

The crackle paste has a lovely texture to it as well as the cracking ability. I also opted for some blue and turquoise colours…

Week 5 - Crackle Paste - Blue & Turquoise - NB

… with a touch of ochre – I do love these colours. Next are some close up views:

Week 5 - Crackle Paste - Blue & Turquoise - detail 1 - NB

Week 5 - Crackle Paste - Blue & Turquoise - detail 2 - NB

Not only does it take time for the crackle paste to work, I also found it takes more time than I realized to paint the crackle paste too! You have to build up the colour in layers, lots of diluted washes of colour, letting each layer dry before adding another…

Week 5 - Crackle Paste - Crazy Paving - NBThe above sample I decided to call “Crazy Paving”. It is also on cardboard and will go in my dedicated Surface Treatment Workshop sketchbook.  Next some close up views:

Week 5 - Crackle Paste - Crazy Paving - detail 1 - NB

Week 5 - Crackle Paste - Crazy Paving - detail 2 - NB

Out of all the crackle paste samples I started with three are complete which I have posted here. Two are in progress but I haven’t decided what to do next with them so I’ll leave those for a while. And one other is not painted at all yet – I will finish it and add it to my sketchbook!

My sister Carolyn will be posting her samples for the Surface Treatment Workshop in a few days, please do pop over and have look! Next week the the Surface Treatment Workshop is focusing on a Faux Encaustic technique – this could be very interesting…

Art · Surface Treatment Workshop

Surface Treatment Workshop – Week 4

Welcome to week 4 of the Surface Treatment Workshop. The focus this week is on using masking tape in mixed media art.

week-4-masking-tape-amaze-nb
Amaze

For the above sample I put masking tape over a collage base and then painted over it. When almost dry I carefully pulled the masking tape off exposing collage patterns underneath the paint…

week-4-squares-nb
Squares

This sample was a print left from week 1 that I wasn’t totally happy with so I decided it would be great to use with some masking tape instead! I put squares of masking tape over the painted base and then painted the squares white. When dry I glued small squares of my own art work over the white squares. I finished with a layer of clear acrylic glaze to ensure the squares of masking tape don’t peel off. The gum on the masking tape will degrade over time, so if you intend to leave making tape on some art work then it needs to be properly fixed down with some gel or glaze medium.

week-4-ocean-mist-nb
Ocean Mist

For this print I started with a stenciled background and then put masking tape over the top. I then sponged  paint over the tape and then carefully peeled the tape off. I let the paint dry and then repeated this process with different colours.

I’m quite pleased with how this weeks samples turned out. Masking tape is a useful item to keep stashed away with your art supplies, just in case… ! Next week the focus is on using crackle paste. I’m really, really looking forward to this one – as a girl in love with texture this is right up my street!

Art · Surface Treatment Workshop

Surface Treatment Workshop – Week 2

Welcome to Week 2 of the Surface Treatment Workshop. The focus for week 2 is stencils. In preparing my samples for this week I made a discovery… a personal discovery… ! I’ve discovered that I don’t actually like frilly, flowery, fussy, swirly stencil patterns. I can appreciate them in other peoples work, other people can make them look lovely, but I don’t like them in my own work…

Having discovered this I now had to completely rethink what I’m going to produce for this weeks workshop. What I’ve also discovered is that I do like  simple shapes, lines and patterns and that unique, individual home made stencils are the way forward…

week-2-simple-squares-nb

For the above sample I used cut out paper shapes as stencils to create simple lines and squares…

week-2-polka-dot-divide-nb

For this image I used a Large Polka Dot stencil. Here we have several different versions of the same stencil layered over each other. Next, how both these images appear in my sketchbook:

week-2-sketchbook-nb

Next another polka dot design – just simple circles. In the centre is a small photo of a piece of my own art work – it has a circle theme which complemented the polka dots…

week-2-decreasing-circles-nb

For the next sample I made a homemade paper stencil. I used thick glossy paper, cut my stencil out and used it several times to create the design below. When I finished with the stencil I cut it up and stuck it over my design to add more wavy lines and colour. I finished by outlining some of the pattern with gold acrylic paint. The photograph below doesn’t really do the art work justice, the reality is much better – however, this was one of the best photos I got!

week-2-stencil-wavy-lines-nb

What I’ve taken away from this exercise is that I’m now determined to be a lot more picky about what commercially available stencils I buy. And I’m going to do a lot more home made stencils. OK, paper stencils are “use once-throw away” stencils but you do get a unique, original design that nobody else in the world has – that’s something that appeals to me. I have already made some home made stencils from acetate sheet – they are reusable and totally original!

For week 3 of the Surface Treatment Workshop the focus is on aluminium foil. I’ve personally never used aluminium foil in art before, so this will be a little voyage of discovery for me… !

Art · Erosion Bundles

Winter Erosion Bundle – Part 3

winter-eb-26-nb

Welcome to part 3 of my Winter Erosion Bundle – the final part! Part 3 is very different to Part 1 and Part 2 – is has no rust and no blueberries! I used just dots of watercolour paint and sprinkles of pearl mica.

winter-eb-27-nb

These papers were on the very outside of the erosion bundle. The watercolour paint gave the papers beautiful soft pastel tones…

winter-eb-28-nb

The pearl mica gave a lovely sheen to the papers that catches the light…

winter-eb-28-detail-nb

Above is a close up view of the previous image.

winter-eb-29-nb

I used tissue paper, deli paper and notebook paper, all of which absorbed colour very readily…

winter-eb-30-nb

winter-eb-31-nb

The lovely pastel tones blend and compliment each other beautifully…

winter-eb-32-nb

Shimmering gold pearl mica with touches of vintage pink…

winter-eb-33-nb

Blues, greens and turquoise – lagoon colours…

winter-eb-34-nb

All the colours of the rainbow…

winter-eb-35-nb

These papers have been carefully stored. I will use them in mixed media art as and when the right project comes along. These erosion bundles take time to produce, so it’s a good idea to build up a good supply of eroded, corroded, vintage papers well in advance!

Click on any of the images to view them larger…

A spring erosion bundle is in the planning stage…

Art · Sketchbooks · Surface Treatment Workshop

Surface Treatment Workshop – Week 1

week-1-stamping-circles-nb

This is week 1 of the Surface Treatment Workshop! Week 1 starts off very basically with stamping. For the sample above I covered a 6″ x 6″ piece of paper with collage and then simply stamped circles over the top in different sizes and colours. I rummaged round the house and found lots of things I could use for stamping circles – above I used a cardboard tube, a jam jar, a little bit of bubble wrap and… the best bit… an empty Belgian Bun packet! The larger dark blue circles were from the bottom of a plastic Belgian Bun packet – this has just got to be the best excuse ever for buying Belgian Buns!

week-1-stamping-blue-fish-nb

For the above sample I started with a 6″ x 6″ piece of paper and covered it with white gesso. Then I stamped a gold and turquoise pattern on the base of the sample using acrylic paints. To create the square pattern I used some of that rubbery stuff you put under mats and rugs to stop them slipping… ! For the small dark circles I used bubble wrap and then simply stamped the fish on. Very simple!

week-1-sketchbook-nb

Both samples have been stuck into a dedicated 8″ x 8″ sketchbook set aside especially for the project. I’m trying not to be overly fussy or fiddly with the samples for this project, after all, it is meant to be an experimental learning curve. I think I’m reasonably happy with how week 1 has turned out – now looking forward to week 2… !

Art · Photography · Sketchbooks · Still Life

Decorated Sketchbook

decorated-sketchbook-1-rn

This sketchbook caught my eye in a shop in town, I couldn’t resist…

It’s beautifully covered with a neutral linen and lots of shiny beads in shades of cream, silver, gold, copper, bronze and amber…

sketchbook-bokeh-4-rn

Sketchbook bokeh…

sketchbook-bokeh-3-rn

The shiny beads catch the light and sparkle…

sketchbook-bokeh-2-rn

sketchbook-bokeh-1-rn

I’m looking forward to filling this book with beautiful things…

Art · Collage · Sketchbooks

Warming Up Winter With Red & Gold

winter-rose-rn

I’ve called this “A Winter Rose” – it’s mixed media on paper, 10 cm x 7.5 cm. I actually used real rose petals in this that I had dried quite a long time ago and saved. I stuck them on with acrylic gel and when dry I went over them with and acrylic glaze tinted with garnet coloured pearl mica. They are now perfectly preserved on my art work!

How my winter rose looks in my collaged sketchbook:

winter-rose-in-sketchbook-rn

The following two pieces of art I have collectively called “Harbour Lights” as the sequins remind me of the lights round Mousehole harbour (Cornwall, UK):

harbour-lights-1-rn

harbour-lights-2-rn

The red and gold work well together on the vintage collage paper background. Both are mixed media on paper and they measure 10 cm x 15 cm and 11 cm x 15 cm respectively. They have both been stuck in my collaged sketchbook.

Art · Sketchbooks · Watercolour

Aurora

 

aurora-rn

A 9 cm x 10 cm abstract mixed media sample for my collaged sketchbook, inspired by the Aurora Borealis. The colours at the base are Intense Blue (Phthalo Blue) and Lemon Yellow watercolours. The blue bled into the yellow to create a gorgeous shade of turquoise and to that I added a touch of Emerald and the tiniest bit of Yellow Ochre. When dry I added complimentary shades of Pearl Mica to add a starry sparkle to my Aurora