Tag Archives: STW

Surface Treatment Workshop – Week 5

Well week 5 of the Surface Treatment Workshop has finally arrived! The focus for this week is crackle paste. I used Golden Crackle Paste and I have to say it is brilliant stuff! Using crackle paste is time consuming but worth the effort and a little patience!

Week 5 - Crackle Paste - Blues & Browns - NB

I did decide to go for some blues and brown colours – couldn’t resist! The above sample is on cardboard and will go in my sketchbook. Next are some closer views of the above sample:

Week 5 - Blues & Browns - detail 1 - NB

Week 5 - Blues & Browns - detail 2 - NB

Week 5 - Blues & Browns - detail 3 - NB

The crackle paste has a lovely texture to it as well as the cracking ability. I also opted for some blue and turquoise colours…

Week 5 - Crackle Paste - Blue & Turquoise - NB

… with a touch of ochre – I do love these colours. Next are some close up views:

Week 5 - Crackle Paste - Blue & Turquoise - detail 1 - NB

Week 5 - Crackle Paste - Blue & Turquoise - detail 2 - NB

Not only does it take time for the crackle paste to work, I also found it takes more time than I realized to paint the crackle paste too! You have to build up the colour in layers, lots of diluted washes of colour, letting each layer dry before adding another…

Week 5 - Crackle Paste - Crazy Paving - NBThe above sample I decided to call “Crazy Paving”. It is also on cardboard and will go in my dedicated Surface Treatment Workshop sketchbook.  Next some close up views:

Week 5 - Crackle Paste - Crazy Paving - detail 1 - NB

Week 5 - Crackle Paste - Crazy Paving - detail 2 - NB

Out of all the crackle paste samples I started with three are complete which I have posted here. Two are in progress but I haven’t decided what to do next with them so I’ll leave those for a while. And one other is not painted at all yet – I will finish it and add it to my sketchbook!

My sister Carolyn will be posting her samples for the Surface Treatment Workshop in a few days, please do pop over and have look! Next week the the Surface Treatment Workshop is focusing on a Faux Encaustic technique – this could be very interesting…

Surface Treatment Workshop – Week 4

Welcome to week 4 of the Surface Treatment Workshop. The focus this week is on using masking tape in mixed media art.

week-4-masking-tape-amaze-nb
Amaze

For the above sample I put masking tape over a collage base and then painted over it. When almost dry I carefully pulled the masking tape off exposing collage patterns underneath the paint…

week-4-squares-nb
Squares

This sample was a print left from week 1 that I wasn’t totally happy with so I decided it would be great to use with some masking tape instead! I put squares of masking tape over the painted base and then painted the squares white. When dry I glued small squares of my own art work over the white squares. I finished with a layer of clear acrylic glaze to ensure the squares of masking tape don’t peel off. The gum on the masking tape will degrade over time, so if you intend to leave making tape on some art work then it needs to be properly fixed down with some gel or glaze medium.

week-4-ocean-mist-nb
Ocean Mist

For this print I started with a stenciled background and then put masking tape over the top. I then sponged  paint over the tape and then carefully peeled the tape off. I let the paint dry and then repeated this process with different colours.

I’m quite pleased with how this weeks samples turned out. Masking tape is a useful item to keep stashed away with your art supplies, just in case… ! Next week the focus is on using crackle paste. I’m really, really looking forward to this one – as a girl in love with texture this is right up my street!

Surface Treatment Workshop – Week 2

Welcome to Week 2 of the Surface Treatment Workshop. The focus for week 2 is stencils. In preparing my samples for this week I made a discovery… a personal discovery… ! I’ve discovered that I don’t actually like frilly, flowery, fussy, swirly stencil patterns. I can appreciate them in other peoples work, other people can make them look lovely, but I don’t like them in my own work…

Having discovered this I now had to completely rethink what I’m going to produce for this weeks workshop. What I’ve also discovered is that I do like  simple shapes, lines and patterns and that unique, individual home made stencils are the way forward…

week-2-simple-squares-nb

For the above sample I used cut out paper shapes as stencils to create simple lines and squares…

week-2-polka-dot-divide-nb

For this image I used a Large Polka Dot stencil. Here we have several different versions of the same stencil layered over each other. Next, how both these images appear in my sketchbook:

week-2-sketchbook-nb

Next another polka dot design – just simple circles. In the centre is a small photo of a piece of my own art work – it has a circle theme which complemented the polka dots…

week-2-decreasing-circles-nb

For the next sample I made a homemade paper stencil. I used thick glossy paper, cut my stencil out and used it several times to create the design below. When I finished with the stencil I cut it up and stuck it over my design to add more wavy lines and colour. I finished by outlining some of the pattern with gold acrylic paint. The photograph below doesn’t really do the art work justice, the reality is much better – however, this was one of the best photos I got!

week-2-stencil-wavy-lines-nb

What I’ve taken away from this exercise is that I’m now determined to be a lot more picky about what commercially available stencils I buy. And I’m going to do a lot more home made stencils. OK, paper stencils are “use once-throw away” stencils but you do get a unique, original design that nobody else in the world has – that’s something that appeals to me. I have already made some home made stencils from acetate sheet – they are reusable and totally original!

For week 3 of the Surface Treatment Workshop the focus is on aluminium foil. I’ve personally never used aluminium foil in art before, so this will be a little voyage of discovery for me… !

Indigo Circles

indigo-circles-nb

A second selection of stamping samples for week 1 of the Surface Treatment Workshop…

This time I used a stencil as a stamp, which was suggested in the book. I used indigo paint with a touch of white mixed in with it…

light-indigo-circles-nb

The prints are very simple, but I like the contrast between the indigo paint and the white paper underneath…

How the prints appear in my sketchbook:

indigo-circles-in-sketchbook-nb

This will be all for week 1 now and for week 2 the focus is on stencils…

Surface Treatment Workshop – Week 1

week-1-stamping-circles-nb

This is week 1 of the Surface Treatment Workshop! Week 1 starts off very basically with stamping. For the sample above I covered a 6″ x 6″ piece of paper with collage and then simply stamped circles over the top in different sizes and colours. I rummaged round the house and found lots of things I could use for stamping circles – above I used a cardboard tube, a jam jar, a little bit of bubble wrap and… the best bit… an empty Belgian Bun packet! The larger dark blue circles were from the bottom of a plastic Belgian Bun packet – this has just got to be the best excuse ever for buying Belgian Buns!

week-1-stamping-blue-fish-nb

For the above sample I started with a 6″ x 6″ piece of paper and covered it with white gesso. Then I stamped a gold and turquoise pattern on the base of the sample using acrylic paints. To create the square pattern I used some of that rubbery stuff you put under mats and rugs to stop them slipping… ! For the small dark circles I used bubble wrap and then simply stamped the fish on. Very simple!

week-1-sketchbook-nb

Both samples have been stuck into a dedicated 8″ x 8″ sketchbook set aside especially for the project. I’m trying not to be overly fussy or fiddly with the samples for this project, after all, it is meant to be an experimental learning curve. I think I’m reasonably happy with how week 1 has turned out – now looking forward to week 2… !

Surface Treatment Workshop

Starting on Wednesday 1st February 2017 I will be starting a new 52 week project with Carolyn Saxby which we’ve decided to call “Surface Treatment Workshop” (STW). We’re going to work our way through this book:

surface-treatment-workshop

This book is full of great imaginative ideas for creating texture and interest on all kinds of surfaces. Some of the techniques are very simple and basic, others are more involved. We’re going to start at the beginning of the book and work our way through each of the 46 techniques in order. And we’re also going to do the inspirational projects at the end, or at least our own personal interpretations of the inspirational projects.

We will post  our results every Wednesday, starting with the 1st of February 2017. I’ll post my results here on my blog and on Flickr. Also I’m going to stick my weekly results into a dedicated sketchbook I have especially reserved for the project.

I’m really looking forward to this – it’s going to be fun… it’s the kind of project where you’re only limited by your imagination…