Tag Archives: Surface Treatment Workshop

Surface Treatment Workshop – Week 3

week-3-aluminium-foil-shapes-nb

The focus on this weeks edition of the Surface Treatment Workshop is Aluminium Foil.

It sounds very simple but in practice I found aluminium foil is not very easy stuff to work with. The good points are that it’s very easy to create texture and patterns with foil but the downside is that it’s not so easy to paint over. The paint doesn’t stick to the foil very well. Using a layer of clear gesso first helped but it still takes several layers of paint to cover the foil and when it dries the paint scratches off very easily. So I’ve got misgivings about it’s archival quality.

I have only one sample for this weeks workshop – pictured above. The foil I used were the foil wrappers from some stock cubes! Four wrappers were needed. And I simply coloured in the existing shapes and patterns in the foil. I used acrylic paint, oil pastels and stuck on some small rusty bits of paper left over from an erosion bundle.

I like my sample above, I like the textures shapes and colours. I’m not quite sure this sample is completely finished yet – I may work into it some more – but I like it so far!

The conclusion of this weeks workshop is that I don’t think I will be using aluminium foil in mixed media art to any great degree but it may possibly have small uses here and there… ! Next week the focus is on Masking Tape – looking forward to this!

Surface Treatment Workshop – Week 2

Welcome to Week 2 of the Surface Treatment Workshop. The focus for week 2 is stencils. In preparing my samples for this week I made a discovery… a personal discovery… ! I’ve discovered that I don’t actually like frilly, flowery, fussy, swirly stencil patterns. I can appreciate them in other peoples work, other people can make them look lovely, but I don’t like them in my own work…

Having discovered this I now had to completely rethink what I’m going to produce for this weeks workshop. What I’ve also discovered is that I do like  simple shapes, lines and patterns and that unique, individual home made stencils are the way forward…

week-2-simple-squares-nb

For the above sample I used cut out paper shapes as stencils to create simple lines and squares…

week-2-polka-dot-divide-nb

For this image I used a Large Polka Dot stencil. Here we have several different versions of the same stencil layered over each other. Next, how both these images appear in my sketchbook:

week-2-sketchbook-nb

Next another polka dot design – just simple circles. In the centre is a small photo of a piece of my own art work – it has a circle theme which complemented the polka dots…

week-2-decreasing-circles-nb

For the next sample I made a homemade paper stencil. I used thick glossy paper, cut my stencil out and used it several times to create the design below. When I finished with the stencil I cut it up and stuck it over my design to add more wavy lines and colour. I finished by outlining some of the pattern with gold acrylic paint. The photograph below doesn’t really do the art work justice, the reality is much better – however, this was one of the best photos I got!

week-2-stencil-wavy-lines-nb

What I’ve taken away from this exercise is that I’m now determined to be a lot more picky about what commercially available stencils I buy. And I’m going to do a lot more home made stencils. OK, paper stencils are “use once-throw away” stencils but you do get a unique, original design that nobody else in the world has – that’s something that appeals to me. I have already made some home made stencils from acetate sheet – they are reusable and totally original!

For week 3 of the Surface Treatment Workshop the focus is on aluminium foil. I’ve personally never used aluminium foil in art before, so this will be a little voyage of discovery for me… !

Indigo Circles

indigo-circles-nb

A second selection of stamping samples for week 1 of the Surface Treatment Workshop…

This time I used a stencil as a stamp, which was suggested in the book. I used indigo paint with a touch of white mixed in with it…

light-indigo-circles-nb

The prints are very simple, but I like the contrast between the indigo paint and the white paper underneath…

How the prints appear in my sketchbook:

indigo-circles-in-sketchbook-nb

This will be all for week 1 now and for week 2 the focus is on stencils…

Surface Treatment Workshop – Week 1

week-1-stamping-circles-nb

This is week 1 of the Surface Treatment Workshop! Week 1 starts off very basically with stamping. For the sample above I covered a 6″ x 6″ piece of paper with collage and then simply stamped circles over the top in different sizes and colours. I rummaged round the house and found lots of things I could use for stamping circles – above I used a cardboard tube, a jam jar, a little bit of bubble wrap and… the best bit… an empty Belgian Bun packet! The larger dark blue circles were from the bottom of a plastic Belgian Bun packet – this has just got to be the best excuse ever for buying Belgian Buns!

week-1-stamping-blue-fish-nb

For the above sample I started with a 6″ x 6″ piece of paper and covered it with white gesso. Then I stamped a gold and turquoise pattern on the base of the sample using acrylic paints. To create the square pattern I used some of that rubbery stuff you put under mats and rugs to stop them slipping… ! For the small dark circles I used bubble wrap and then simply stamped the fish on. Very simple!

week-1-sketchbook-nb

Both samples have been stuck into a dedicated 8″ x 8″ sketchbook set aside especially for the project. I’m trying not to be overly fussy or fiddly with the samples for this project, after all, it is meant to be an experimental learning curve. I think I’m reasonably happy with how week 1 has turned out – now looking forward to week 2… !

Surface Treatment Workshop

Starting on Wednesday 1st February 2017 I will be starting a new 52 week project with Carolyn Saxby which we’ve decided to call “Surface Treatment Workshop” (STW). We’re going to work our way through this book:

surface-treatment-workshop

This book is full of great imaginative ideas for creating texture and interest on all kinds of surfaces. Some of the techniques are very simple and basic, others are more involved. We’re going to start at the beginning of the book and work our way through each of the 46 techniques in order. And we’re also going to do the inspirational projects at the end, or at least our own personal interpretations of the inspirational projects.

We will post  our results every Wednesday, starting with the 1st of February 2017. I’ll post my results here on my blog and on Flickr. Also I’m going to stick my weekly results into a dedicated sketchbook I have especially reserved for the project.

I’m really looking forward to this – it’s going to be fun… it’s the kind of project where you’re only limited by your imagination…