Tag Archives: Week 5

Surface Treatment Workshop – Week 5

Well week 5 of the Surface Treatment Workshop has finally arrived! The focus for this week is crackle paste. I used Golden Crackle Paste and I have to say it is brilliant stuff! Using crackle paste is time consuming but worth the effort and a little patience!

Week 5 - Crackle Paste - Blues & Browns - NB

I did decide to go for some blues and brown colours – couldn’t resist! The above sample is on cardboard and will go in my sketchbook. Next are some closer views of the above sample:

Week 5 - Blues & Browns - detail 1 - NB

Week 5 - Blues & Browns - detail 2 - NB

Week 5 - Blues & Browns - detail 3 - NB

The crackle paste has a lovely texture to it as well as the cracking ability. I also opted for some blue and turquoise colours…

Week 5 - Crackle Paste - Blue & Turquoise - NB

… with a touch of ochre – I do love these colours. Next are some close up views:

Week 5 - Crackle Paste - Blue & Turquoise - detail 1 - NB

Week 5 - Crackle Paste - Blue & Turquoise - detail 2 - NB

Not only does it take time for the crackle paste to work, I also found it takes more time than I realized to paint the crackle paste too! You have to build up the colour in layers, lots of diluted washes of colour, letting each layer dry before adding another…

Week 5 - Crackle Paste - Crazy Paving - NBThe above sample I decided to call “Crazy Paving”. It is also on cardboard and will go in my dedicated Surface Treatment Workshop sketchbook.  Next some close up views:

Week 5 - Crackle Paste - Crazy Paving - detail 1 - NB

Week 5 - Crackle Paste - Crazy Paving - detail 2 - NB

Out of all the crackle paste samples I started with three are complete which I have posted here. Two are in progress but I haven’t decided what to do next with them so I’ll leave those for a while. And one other is not painted at all yet – I will finish it and add it to my sketchbook!

My sister Carolyn will be posting her samples for the Surface Treatment Workshop in a few days, please do pop over and have look! Next week the the Surface Treatment Workshop is focusing on a Faux Encaustic technique – this could be very interesting…

Crackin’ Up – A Work In Progress

We have decided to defer the final results of Week 5 of the Surface Treatment Workshop – (Crackle Paste) till next week due to the pressures of other commitments and the fact that Crackle Paste actually takes a little bit longer to do than most of the other mixed media projects in the workshop. But I thought I would briefly share with you my progress and observations so far…

My very first observation of crackle paste was the smell when I opened the pot – it had quite a pungent smell. I used Golden Crackle Paste.

Crackle Paste 1 - NB

The images above an below are some crackle paste applied to a canvas board. The top image is of the top half of the board and the image below is the bottom of the board. The canvas board measures 8″ x 6″, which is slightly larger than would liked to have used but it was all I had available…

Crackle Paste 2 - NB

The cracks developed quite well on the canvas board. It took about 48 hours for the cracks to develop. This is my second key observation about crackle paste – crackle paste takes time to dry out and crack. It’s recommended that you don’t try to hurry the process and allow 2 – 3 days for the cracks to develop.

Crackle Paste 3 - NB

The above sample is crackle past on some fairly rigid cardboard. This brings me to my 3rd observation about crackle paste – you do need to apply it to a rigid surface. Flexible surfaces (like paper) can cause the paste to flake off when it dries…

Crackle Paste 4 - NB

A thin layer of crackle paste creates finer cracks, whereas a thicker layer like in the above sample creates larger, wider cracks…

Crackle Paste 5 - NB

Above is crackle paste applied to some pieces of corrugated cardboard. To generally sum up my first impressions of crackle paste I would say that it a very useful substance to use in your art but it takes time and patience to work. And you do need to follow the instructions on the pot – “when all else fails read the instructions…” those words often ring in my ears when I’m not sure about something….

So in all I have about 6 crackle paste samples to work with. What I need to do now is to get cracking (pun intended!) and get these samples painted… !! I will post the end results next week.